Skip to main content
Pinnacle Contractor Calculator

Siding Calculator

Estimate siding square footage, material, labor, and client pricing for vinyl, fiber cement, LP SmartSide, wood, metal, stucco, composite, brick veneer, stone veneer, and accent panels.

This is an estimate, not a bid or contract. Every job has unique conditions — access, structure, moisture, code — that software cannot account for.

Use at your own risk. Pinnacle Designs, LLC is not liable for bids, losses, or code compliance based on calculator output. You are responsible for verifying all numbers before use.

Terms of Service (limitation of liability & your responsibilities)

Always verify local building codes. Supplier prices vary by region. Add waste for cuts, mistakes, and damaged material.

Job Site Market (ZIP & Region)

Enter the job ZIP — not your shop — to load typical local labor and material defaults. Useful when bidding out of town or out of state.

Most U.S. ZIPs auto-select a region. Unknown ZIPs — pick the closest market manually.

Typical U.S. contractor rates, loaded ~5% above market average — adjust for your bid.

National Average — typical contractor labor ~$57.75/hr

Typical labor rates align with the national average.

Defaults load ~5% above typical market averages — a conservative benchmark when clients compare your bid. Edit any rate below for your actual numbers.

Regional defaults update labor, materials, markup, and tax in this calculator. Your job ZIP and region are saved across all calculators — change ZIP when you switch to a different job site.

Estimate — not a bid. This is an estimate, not a bid or contract. Every job has unique conditions — access, structure, moisture, code — that software cannot account for. Each job is unique. Final prices may vary based on site conditions, scope, materials, labor, and your local market. Use at your own risk. Pinnacle Designs, LLC is not liable for bids, losses, or code compliance based on calculator output. You are responsible for verifying all numbers before use. Full terms

Wall Dimensions

~21 SF each deducted

~15 SF each deducted

Siding Materials

Pricing

National Average default

Save stores this on your device · Add to Estimatesends material & labor lines to the Full Job Estimator

Material List / Shopping List

  • Vinyl Siding
    1,278 SF
  • With waste
    1,470 SF (14.70 squares)

Results Summary

Pricing RegionNational Average
Net Wall SF1,278
Primary MaterialVinyl Siding
AccentNone
Squares14.70
Labor ÷ Material61%

Recommended Client Price

$18,884.25

Estimate — not a bid

Numbers from this tool are planning estimates only. They are not a contract, quote, binding bid, or professional advice. Every job carries its own challenges — hidden damage, tight access, moisture, local code, and scope details — that no calculator can see.

Each project is different. Access, existing conditions, code requirements, material choices, and your local market all affect the final price. Use these figures as a starting point — your actual price may vary.

By using this tool you agree you will not rely on it as a final bid without your own verification. See our Terms of Service for limitations of liability and your responsibilities.

Read full terms & conditions

Cost Breakdown

Materials$8,234.85
Labor$5,011.68
Overhead$1,324.65
Markup$2,914.24
Tax$1,398.83
Client Price$18,884.25
Profit (15.4% margin)$2,914.24
How this was calculated
  1. Gross SF = wall length × height × wall count
  2. Openings deducted: ~21 SF per door, ~15 SF per window
  3. Accent area = net SF × accent % (brick or stone)
  4. Waste added per material type; 1 square = 100 SF

Related Calculators

FramingPaintPorches

Frequently Asked Questions

How much siding waste should I add?
Plan 10–15% for vinyl and fiber cement. Brick and stone veneer often need 15–20% for cuts and breakage.
Can I mix siding with brick or stone accents?
Yes — pick a primary siding type and set an accent percentage for brick or stone veneer on gables, wainscot, or entry walls.

Siding Calculator — Vinyl, Fiber Cement, Wood & More

Siding takeoffs start with gross wall area minus openings, plus waste for cuts and laps. Estimate square footage for vinyl, fiber cement (Hardie), LP SmartSide, wood clapboard, metal panels, stucco, brick veneer, or stone veneer — with optional accent panel zones.

Enter your material cost per square and install labor rate. The calculator accounts for starter strips, J-channel, corner posts, and house wrap so your bid covers the full envelope, not just field panels.