Skip to main content
Pinnacle Contractor Calculator

Paint Calculator

Paint multiple rooms with individual sizes, surfaces, coats, and ceilings — primer matched to paint gallons.

This is an estimate, not a bid or contract. Every job has unique conditions — access, structure, moisture, code — that software cannot account for.

Use at your own risk. Pinnacle Designs, LLC is not liable for bids, losses, or code compliance based on calculator output. You are responsible for verifying all numbers before use.

Terms of Service (limitation of liability & your responsibilities)

Always verify local building codes. Supplier prices vary by region. Add waste for cuts, mistakes, and damaged material.

Job Site Market (ZIP & Region)

Enter the job ZIP — not your shop — to load typical local labor and material defaults. Useful when bidding out of town or out of state.

Most U.S. ZIPs auto-select a region. Unknown ZIPs — pick the closest market manually.

Typical U.S. contractor rates, loaded ~5% above market average — adjust for your bid.

National Average — typical contractor labor ~$57.75/hr

Typical labor rates align with the national average.

Defaults load ~5% above typical market averages — a conservative benchmark when clients compare your bid. Edit any rate below for your actual numbers.

Regional defaults update labor, materials, markup, and tax in this calculator. Your job ZIP and region are saved across all calculators — change ZIP when you switch to a different job site.

Estimate — not a bid. This is an estimate, not a bid or contract. Every job has unique conditions — access, structure, moisture, code — that software cannot account for. Each job is unique. Final prices may vary based on site conditions, scope, materials, labor, and your local market. Use at your own risk. Pinnacle Designs, LLC is not liable for bids, losses, or code compliance based on calculator output. You are responsible for verifying all numbers before use. Full terms

Rooms (1)

Room 1

Job Settings & Pricing

× 1 rooms

Save stores this on your device · Add to Estimatesends material & labor lines to the Full Job Estimator

Material List / Shopping List

  • Paint (total)
    2.0 gallons
  • Room 1
    2.0 gal paint
  • Primer
    2.0 gallons

Results Summary

Pricing RegionNational Average
Rooms1
Total Area348 sq ft
Paint Gallons2.0
Primer Gallons2.0
Labor ÷ Material219%

Recommended Client Price

$763.41

Estimate — not a bid

Numbers from this tool are planning estimates only. They are not a contract, quote, binding bid, or professional advice. Every job carries its own challenges — hidden damage, tight access, moisture, local code, and scope details — that no calculator can see.

Each project is different. Access, existing conditions, code requirements, material choices, and your local market all affect the final price. Use these figures as a starting point — your actual price may vary.

By using this tool you agree you will not rely on it as a final bid without your own verification. See our Terms of Service for limitations of liability and your responsibilities.

Read full terms & conditions

Cost Breakdown

Materials$168.00
Labor$367.50
Overhead$53.55
Markup$117.81
Tax$56.55
Client Price$763.41
Profit (15.4% margin)$117.81
How this was calculated
  1. Each room calculated separately then totaled
  2. Raw drywall adds 30% paint & primer per room
  3. Primer gallons match paint gallons (heavy coat)
  4. Labor: flat rate per room or hours × rate

Related Calculators

DrywallFlooringMarkup & Profit

Frequently Asked Questions

Can each room be different?
Yes — set dimensions, surface type, coats, and ceiling per room. Add as many rooms as you need.
Do I need primer?
A heavy primer coat improves adhesion — we recommend the same gallon count as your paint order.

Paint Calculator — Gallons, Primer & Labor Estimates

Interior and exterior paint jobs require accurate surface area calculations minus openings, plus primer coats on new drywall or color changes. Estimate gallons of paint and primer, roller covers, tape, and labor hours based on your production rate per square foot.

Set coats of finish paint, include ceiling and trim separately, and adjust for textured surfaces that consume more material. Export a material list and client price that accounts for overhead, markup, and local tax.